Sensore laser di distanza a basso costo

Low cost laser distance sensor offers high reliability

The new optoNCDT ILR 1030 complements Micro-Epsilon's existing range of economical, low cost distance measurement sensors. The new sensor offers a measuring range between 0.2m and 8m on diffuse reflective surfaces, even as high as 50m when using a reflector plate. Special features of this model include its high measurement speed of 100Hz, which also enables length measurements with different objects in the measuring range, as well as the high reliability of measurements on different target materials.

The optoNCDT ILR 1030 is the smallest laser distance sensor in its class. The sensor operates on the time-of-flight principle. It is also insensitive to external light influences and can even measure under artificial lighting. The sensor provides a constant resolution over the entire measuring range. The sensor operates at temperatures between -30°C and 50°C. The full benefits of the optoNCDT ILR 1030's price advantage become clear with small to large OEM orders. The sensor measures with a visible, class II laser pulse, enabling easy alignment on the target. The sensor can be set up and configured directly using the keypad on the housing. The software provided enables the user to make additional adjustments.

Per ulteriori informazioni contatta: boiocchi@luchsinger.it

Sensore laser di spostamento a luce blu

Displacement sensors with a blue laser

Micro-Epsilon presents at first a triangulation sensor that utilise Blue Laser technology. In numerous applications, Blue Laser sensors are superior to standard sensors that use a red laser diode. When measuring on metals, particularly annealing metals and organic materials such as wood, skin, foodstuffs, veneers, etc., the wavelength of the blue-purple laser offers significant benefits. In contrast to a red laser, the reduced wavelength of the blue laser light does not penetrate the measuring object. The blue laser generates a minimal laser point on the surface and therefore offers stable, precise results on measuring objects that are normally considered as critical. The design of triangulation sensors with Blue Laser technology is a complete re-design. The sensors are equipped with new high-end lenses, new intelligent laser control and evaluation algorithms. Laser sensors with Blue Laser illustrate the ongoing development of numerous standard commercially available laser sensors.

For example, the optoNCDT 1700 industrial standard laser sensor provides this new Blue Laser technology. Depending on the measuring object and measuring range, the appropriate sensor can be selected with either red or blue laser light.

Per ulteriori informazioni contattare: boiocchi@luchsinger.it 

Sensore di forza miniatura

Lightweight Miniature Piezoelectric Force Sensor, Model 1022V

Dytran Instruments has introduced the model 1022V, an IEPE force sensor, designed to offer low-mass dynamic measurement capabilities within Dytran's smallest and most lightweight package.
Measuring just 0.49 inches tall and weighing just 4.2 grams (without cable), the Dytran model 1022V offers precision force measurement capabilities of up to 50 lbf, with a 100 mV/lbf sensitivity and an unloaded natural frequency of 50 kHz.  As an IEPE sensor, the model 1022V features built-in electronics, eliminating the need for an external charge amplifier and converter.  Design of the model 1022V features a quartz sensing element, operating in compression mode and packaged in a lightweight titanium housing with an integral 5-foot coaxial cable, terminating to a 10-32 coaxial connector.  A series of 10-32 tapped holes, located at both the top and bottom of the sensor housing, are expressly designed to facilitate mounting of the sensor into threaded holes on the driving rods and test specimen.
Recommended accessories for the Dytran model 1022V include the model 6011A coaxial cable assembly and model 4110C or model 4115B current source.  With its durability, highly compact size and performance, the Dytran model 1022V is ideal for high-reliability modal analysis, process control, and general purpose dynamic force measurements where mass loading is a concern, or where vertical space may be limited.

Per ulteriori informazioni contatta: noris@luchsinger.it